User`s guide

G-3000H User’s Guide
202 Chapter 22 System Information and Diagnosis
Figure 129 Menu 24.1 System Maintenance: Status
The following table describes the fields present in this menu.
Menu 24.1 - System Maintenance - Status 01:55:5
Sat. Jan. 01, 200
Port Status TxPkts RxPkts Cols Tx B/s Rx B/s Up Tim
Ethernet 100M/Full 5802 2001 0 303 128 1:54:
Wireless 54M 3811 74 0 64 0 1:55:
Port Ethernet Address IP Address IP Mask DHCP
Ethernet 00:13:49:2A:2A:F5 192.168.1.2 255.255.255.0 None
Wireless 00:13:49:2A:2A:F5
System up Time: 1:55:57
ZyNOS F/W Version: V3.50(AAC.1)b2 | 08/11/2005
Name: G-3000H
Press Command:
COMMANDS: 9-Reset Counters ESC-Exit
Table 73 Menu 24.1 System Maintenance: Status
FIELD DESCRIPTION
Port This is the port type. Port types are: Ethernet, WLAN1 and WLAN 2.
Status This shows the status of the remote node.
TxPkts This is the number of transmitted packets to this remote node.
RxPkts This is the number of received packets from this remote node.
Cols This is the number of collisions on this connection.
Tx B/s This shows the transmission rate in bytes per second.
Rx B/s This shows the receiving rate in bytes per second.
Up Time This is the time this channel has been connected to the current remote node.
Ethernet Address This shows the MAC address of the port.
IP Address This shows the IP address of the network device connected to the port.
IP Mask This shows the subnet mask of the network device connected to the port.
DHCP This shows the DHCP setting (None or Client) for the port.
System Up Time This is the time the ZyAIR is up and running from the last reboot.
ZyNOS F/W Version Refers to the ZyNOS (ZyXEL Network Operating System) system firmware version. ZyNOS
is a registered trademark of ZyXEL Communications Corporation.
Name This displays the device name.