User`s guide

G-3000H User’s Guide
190 Chapter 17 LAN Setup
Figure 119 Menu 3.5 Wireless LAN Setup
3 Move the cursor to the Edit Layer-2 Isolation field. Press [SPACE BAR] to select Ye s
and press [ENTER]. Menu 3.5.5 – Layer 2 Isolation displays as shown next.
Figure 120 Menu 3.5.5 Layer-2 Isolation
Menu 3.5 - Wireless LAN Setup
Edit MAC Address Filter= No
Operating Mode= MESSID Edit Roaming Configuration= No
Edit SSID Profile= No
Hide Name (SSID)= No Select SSID Profile= N/A
Channel ID= CH06 2437MHz Edit Bridge Link Configuration= No
RTS Threshold= 2432 Preamble= Long
Frag. Threshold= 2432 802.11 Mode= Mixed
Max. Frame Burst= 650
Breathing LED= Yes
Block Intra-BSS Traffic= No
Output Power= <11b>17dBm/<11g>13dBm
Edit Layer-2 Isolation= Yes
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Menu 3.5.5 - Layer-2 Isolation
Allow devices with these MAC addresses
------------------------------------------------------------------------------
1= 00:00:00:00:00:00 13= 00:00:00:00:00:00 25= 00:00:00:00:00:00
2= 00:00:00:00:00:00 14= 00:00:00:00:00:00 26= 00:00:00:00:00:00
3= 00:00:00:00:00:00 15= 00:00:00:00:00:00 27= 00:00:00:00:00:00
4= 00:00:00:00:00:00 16= 00:00:00:00:00:00 28= 00:00:00:00:00:00
5= 00:00:00:00:00:00 17= 00:00:00:00:00:00 29= 00:00:00:00:00:00
6= 00:00:00:00:00:00 18= 00:00:00:00:00:00 30= 00:00:00:00:00:00
7= 00:00:00:00:00:00 19= 00:00:00:00:00:00 31= 00:00:00:00:00:00
8= 00:00:00:00:00:00 20= 00:00:00:00:00:00 32= 00:00:00:00:00:00
9= 00:00:00:00:00:00 21= 00:00:00:00:00:00
10= 00:00:00:00:00:00 22= 00:00:00:00:00:00
11= 00:00:00:00:00:00 23= 00:00:00:00:00:00
12= 00:00:00:00:00:00 24= 00:00:00:00:00:00
------------------------------------------------------------------------------
Press ENTER to Confirm or ESC to Cancel: