User`s guide

G-3000H User’s Guide
Chapter 14 Maintenance 167
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the ZyAIR again.
Figure 95 Firmware Upload In Process
The ZyAIR automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 96 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the System Status
screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the F/W Upload screen.