User`s guide

G-3000H User’s Guide
120 Chapter 9 VLAN
Figure 62 New Remote Access Policy for VLAN Group
2 The Conditions window displays. Select Add to add a condition for this policy to act on.
3 In the Select Attribute screen, click Windows-Groups and the Add button.
Figure 63 Specifying Windows-Group Condition
4 The Select Groups window displays. Select a remote access policy and click the Add
button. The policy is added to the field below. Only one VLAN Group should be
associated with each policy.
5 Click OK and Next in the next few screens to accept the group value.