User`s guide

G-3000H User’s Guide
114 Chapter 9 VLAN
Figure 54 VLAN
The following table describes the labels in this screen.
Table 34 VLAN
LABEL DESCRIPTION
Enable VLAN Tagging Select this check box to turn on VLAN tagging.
Management VLAN ID Enter a number from 1 to 4094 to define this VLAN group. At least one device
in your network must belong to this VLAN group in order to manage the ZyAIR.
Note: Mail and FTP servers must have the same management
VLAN ID to communicate with the ZyAIR.
See Configuring Management VLAN Example on page 115 for more
information.
VLAN Mapping Table Use this table to map names to VLAN IDs so that the RADIUS server can
assign each user or user group a mapped VLAN ID. See the your RADIUS
server documentation for more information on configuring VLAN ID attributes.
See Configuring Microsoft’s IAS Server Example on page 117 for more
information.
Index Select a check box to enable the VLAN mapping profile.
ID Type a VLAN ID. Incoming traffic from the WLAN is authorized and assigned
a VLAN ID by the RADIUS server before it is sent to the LAN.
Note: This ID is NOT the same as the VLAN ID displayed in the
SSID screen.