User`s guide

G-3000H User’s Guide
Chapter 8 Other Wireless Configurations 107
• Select the Enable Layer-2 Isolation check box.
• Enter C’s MAC address in the Allow devices with these MAC addresses field.
Figure 49 Layer-2 Isolation Example 2
8.2.4 Layer-2 Isolation Example 3
In the following example wireless clients 1 and 2 can communicate with B and C but not 3.
• Select the Enable Layer-2 Isolation check box.
• Configure more than one MAC address. Enter the server and your ZyAIR MAC
addresses in the Allow devices with these MAC addresses fields.