User`s guide

ZyAIR G-1000 Access Point User’s Guide
9-8 Maintenance
9.5.2 Restore Configuration
Restore configuration replaces your ZyAIR's current configuration with a previously saved configuration.
Restore files (usually) have a .ROM extension, e.g., "zyair.rom". The system reboots automatically after the
file transfer is complete and uses the configured values in the file.
WARNING!
Do not interrupt the file transfer process as this may PERMANENTLY DAMAGE
YOUR ZyAIR. When the Restore Configuration process is complete, the ZyAIR will
automatically restart.
Figure 9-9 Restore Configuration
The following table describes the fields in this screen.
Table 9-5 Restore Configuration
LABEL DESCRIPTION
File Path
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse...
Click Browse... to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Upload
Click Upload to begin the upload process.
Do not turn off the device while configuration file upload is in progress.
After you see a “configuration upload successful” screen, you must then wait one minute before logging into
the device again.