User`s guide

ZyAIR G-1000 Access Point User’s Guide
4-4 System Screens
Figure 4-3 Time Setting
The following table describes the labels in this screen.
Table 4-3 Time/Date
LABEL DESCRIPTION
Time Protocol Select the time protocol that your time server sends when you turn on the ZyAIR. Not
all time servers support all protocols, so you may have to check with your ISP/network
administrator or use trial and error to find a protocol that works.
The main difference between them is the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC 868) format displays a 4-byte integer giving the total number of seconds
since 1970/1/1 at 0:0:0.
The default, NTP (RFC 1305), is similar to Time (RFC 868).
Select None to enter the time and date manually.