User`s guide

ZyAIR G-1000 Access Point User’s Guide
System Maintenance and Information 18-3
Table 18-1 Menu 24.10 System Maintenance: Time and Date Setting
FIELD DESCRIPTION
Time Server
Address
Enter the IP address or domain name of your time server. Check with your
ISP/network administrator if you are unsure of this information.
Current Time This field displays an updated time only when you reenter this menu.
New Time Enter the new time in hour, minute and second format.
Current Date This field displays an updated date only when you re-enter this menu.
New Date Enter the new date in year, month and day format.
Time Zone
Press [SPACE BAR] and then [ENTER] to set the time difference between your
time zone and Greenwich Mean Time (GMT).
Daylight Saving
If you use daylight savings time, then choose Yes.
Start Date If using daylight savings time, enter the month and day that it starts on.
End Date If using daylight savings time, enter the month and day that it ends on
Once you have filled in this menu, press [ENTER] at the message “Press ENTER to Confirm or ESC to
Cancel“ to save your configuration, or press [ESC] to cancel.
18.2.1 Resetting the Time
The ZyAIR resets the time in three instances:
i. On leaving menu 24.10 after making changes.
ii. When the ZyAIR starts up, if there is a time server configured in menu 24.10.
iii. 24-hour intervals after starting.