User`s guide

ZyAIR G-1000 Access Point User’s Guide
12-8 LAN Setup
Table 12-4 Menu 3.5.2 Roaming Configuration
FIELD DESCRIPTION
Port # Type the port number to communicate roaming information between access points. The port
number must be the same on all access points. The default is 16290. Make sure this port is
not used by other services.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.