User`s guide

ZyAIR G-1000 Access Point User’s Guide
LAN Setup 12-3
Figure 12-3 Menu 3.5 Wireless LAN Setup
The following table describes the fields in this menu.
Table 12-2 Menu 3.5 Wireless LAN Setup
FIELD DESCRIPTION EXMAPLE
ESSID
The ESSID (Extended Service Set IDentity) identifies the AP the wireless
station is to associate to. Wireless stations associating to the AP must have
the same ESSID. Enter a descriptive name up to 32 printable 7-bit ASCII
characters.
This field is only available when you select Access Point in the Operating
Mode field.
Wireless
Hide ESSID
Press [SPACE BAR] and select Yes to hide the ESSID in the outgoing data
frame so a intruder cannot obtain the ESSID through passive scanning.
No
Channel ID
Press [SPACE BAR] to select a channel. This allows you to set the operating
frequency/channel depending on your particular region.
CH06
2437MHz
RTS
Threshold
Setting this attribute to zero turns on the RTS/CTS handshake. Enter a value
between 0 and 2432.
2432
Frag.
Threshold
This is the maximum data fragment size that can be sent. Enter a value
between 256 and 2432.
2432
Menu 3.5 - Wireless LAN Setup
ESSID= Wireless
Hide ESSID= No
Channel ID= CH06 2437MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP Encryption= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Authen. Method= N/A
Edit MAC Address Filter= No
Edit Roaming Configuration= No
Breathing LED= Yes
Press ENTER to Confirm or ESC to Cancel:
.