User`s guide

ZyXEL G-162 Quick Start Guide

Troubleshooting

PROBLEM CORRECTIVE ACTION

LED PWR is off

when inserting the

ZyXEL G-162 into

the CardBus slot

Make sure the ZyXEL G-162 is properly inserted into the

CardBus slot.

Try to Insert the ZyXEL G-162 again. (Do not bend, force or

twist into the slot.)

LED LINK is off

when the LED

PWR is on

Please check and make sure your AP/Router is up and running.

Make sure you are in the coverage of the AP/Router you

connect to.

Make sure the ZyXEL G-162 is properly inserted into the

CardBus slot and then restart your computer. Once the

computer has restarted, check the status of the LEDs on the

ZyXEL G-162.

Perform a hardware scan by clicking Start, Settings, Control

Panel and then double-click Add/Remove Hardware. (Steps

may vary depending on Windows version).

Follow the on-screen instructions to search for the ZyXEL G-

162 and install the driver.

Windows does not

auto-detect the

ZyXEL G-162.

Check for possible hardware conflicts. In Windows, click Start,

Settings, Control Panel, System, Hardware and then click

Device Manager. Verify the status of the ZyXEL G-162 under

Network Adapter. (Steps may vary depending on the Windows

version).