User`s guide

Ethernet Switch CLI Reference Guide
221
CHAPTER 63
TFTP Commands
Use these commands to back up and restore configuration and firmware via TFTP.
63.1 Command Summary
The following section lists the commands for this feature.
Table 132 tftp Command Summary
COMMAND DESCRIPTION M P
copy tftp flash <ip> <remote-
file> [<local-file>]
Restores firmware via TFTP. E 13
copy tftp config <index> <ip>
<remote-file>
Restores configuration with the specified filename from the
specified TFTP server to the specified configuration file on
the Switch.
index: 1 or 2
Use reload config <1|2> to restart the Switch and use
the restored configuration.
E13
copy running-config tftp <ip>
<remote-file>
Backs up running configuration to the specified TFTP server
with the specified file name.
E13