Technical information

Proprietary & Confidential Information

to 192.168.2.1/24. Then create new interface group and found the LAN host address also

be 192.168.2.1/24.

2. [LAN][ITS 140401095] WAN side change IP subnet, CPE redirect to URL of LAN.

Access web GUI from WAN, then change LAN host address and CPE will redirect url to

LAN as 192.168.1.1.

3. [GUI][ITS 140500032] Spelling and Grammar mistakes.

4. [MobileApp] Wan interface disappear after auto hunt. Use app to do vc auto hunt ppp

WAN, the user name & password will be changed.

5. [VOIP][ITS 140400476] No Audio when doing *70, , same for *85.

6. [TR69] TR069 overloaded TCP session size for HTTPS, when use https via tr69, the

packet size were 10x of http.

7. [WAN] WAN interface disappear after vc auto hunt. When finish vc auto hunt procedure,

sometime the wan interface disappear.

8. [Configuration][ITS 140500036] Backup Restore issue – The configuration of Log setting

page can’t be saved in backup configuration from GUI. In current, we only support

supervisor account to save Log setting.

9. [GUI][ITS 140500043] When using IE10 and you log into the GUI of the VMG8924 the

GUI's first page is not displayed correctly, when opening any other page in the GUI the

page is displayed correctly

Modifications in V1.00(AAKL.5)b3

1. [ITS :140302182] adjust Italy’s dial tone.

2. [ITS :140400531]NAT problem :

Topology:

Setup is Laptop----VMG8924--HUB--Switch-----internet

Monitor PC

Step1: Reset to default romfile file

Step2: Configuration WAN setting for Ethernet.

Step3: Change subnet to 192.168.10.1 from 192.168.1.1

Step4: At this time, Monitor PC will receive the trace 192.168.10.1...etc(see attached trace)