Technical information

Proprietary & Confidential Information

DHCP Relay need to disable nat of all WAN configuration but try to disable nat in all of

WAN still can’t enable DHCP Relay.

4. [Backup Configuration][ITS#140500036] Backup Restore issue. The Log Settings page

in the GUI, then change setting and clicked on Apply, backed up the configuration,

factory reset the VMG. Restored the backed up configuration - Saw that the log settings

were back to default.

5. [Wireless][SPRID# 140527483,140626498] The WPS can’t work.

A. Mark the wps field and apply, the mark of the field will disappear. Already fix in trunk

B. The PBC and PIN methods can't work.

6. [GUI][SPRID#140624316] Password issue as bellow cases:

A. Incorrect wording in change password page in login page, it show "Change

password… The password must contain 6 to 256 characters". But only support 20

characters.

B. The valid password length in “Change password page” and “user account page” is

difference. Login through admin/1234, and change the password to

1234567890123456789a by Change password page, it works well, then, change the

password to12345a by Maintenace page, it can be applied successfully, but the

password doesn't change.

7. [VOIP][SPRID#140627621,140627622] The Unattended/ attended call transfer doesn’t

work.

Modifications in V1.00(AAKL.5)b4

[FEATURE ENHANCED]

1. [VOIP] Add country code for SLOVAKIA & SLOVENIA.

2. [VPN] Support PPTP.

3. [TR-064] Support Multimedia Auto Provisioner.

4. [MobileApp] Configure parental control too slow.

5. [GUI][ITS 140500040] When user configures the static DHCP, then alert a message to

note user to renew device's IP.

[FEATURE MODIFIED]

1. [Wizard] Remove time zone setting in quick start wizard.

[BUG FIX]

1. [LAN][ITS 140401095] CPE create the same IP subnet. If change the LAN host address