Technical information

Proprietary & Confidential Information

38. [ITS: #130804887] Deny Ping Response

step:

1. make sure CPE get WAN IP (I used EtherWAN)

2. ping to CPE’s WAN IP, CPE no response

3. access to Firewall> DoS, enable “Deny Ping Response” then disable it

4. ping to CPE’s WAN IP, CPE responsed

39. [ITS: #140105286] In PTM mode, when traffic mirror is enabled, device will hang on and

reboot.

40. [ITS: #140204248] IOP issue with old Mac OSX 10.6.8.

41. [ITS: #131201237, #140201118] Interface collisions & error count is too high.

42. [ITS: #140103717] No IPv6 when v6 firewall is disabled.

43. [ITS: #140104552] STB first packet goes through DATA WAN

Symptom:

1. Go to web page "interface grouping"

2. Enter filter page, bind option 60 with IPTV WAN

3. Connect STB at LAN side, STB send DHCP packet with option 60, and get IP, and http

packet from STB goes through DATA WAN

4. Should goes though IPTV WAN

44. [ITS: #140200732] WPS button on enable 2.4Ghz, should enable both 2.4G/5G.

45. [ITS: #140204162] Random PC cannot ping a host. 3 LAN clients connect to CPE and

each client to ping 3 same public IP at the same time, after 2-3 hours and found the

random client occurs ping loss in random ping traffic.

46. [ITS: #140301470] MSTV freeze sometimes on VDSL/ADSL.

47. Sometime write configuration to flash will fail.

[ITS: #140400463] Do configuration provisioning via ACS server.

[ITS: #140400465] reset to default via GUI fail.

48. Prevent access of backup settings directly, e.g. http://<CPE

IP>/configuration-backupsettings.conf, without login.

49. Modify admin password as clear text in configuration file and upgrade configuration from

GUI. The new password will .

50.

Modifications in V1.00(AAKL.4)C0

Base on V1.00(AAKL.4)b3 to release V1.00(AAKL.4)C0