Technical information

© ZyXEL Communication Corp. Page 10 of 27
Proprietary & Confidential Information
Step1: Reset to default romfile
Step2: Configuration WAN setting for Ethernet.
Step3: Change subnet to 192.168.10.1 from 192.168.1.1
Step4: plug out/in WAN cable
Step5: At this time, Monitor PC will receive the trace 192.168.10.1...etc(see attached trace)
<TEST case3>
Step1: Reset to default romfile
Step2: Configuration WAN setting for Ethernet.
Step3: Change subnet to 192.168.10.1 from 192.168.1.1
Step4: Release/renew WAN ip address in WEB GUI.
Step5: At this time, Monitor PC will receive the trace 192.168.10.1...etc(see attached trace)
Modifications in V1.00(AAKL.5)b2
[FEATURE ENHANCED]
1. [TR69] Add a Landing Page and set by TR069.
2. [GUI] Display the Serial Number to the status page.
3. [ROM-D] Support supervisor can save/clean configuration to ROM-D via GUI in
Configuration ROM-D page.
4. [CLI] support wan edit command to Enable/Disable VLAN tag
wan edit servicename <name> [--vlan <disable>]
wan edit servicename <name> [--vlan <vlan id>]
wan edit servicename <name> [--8021pq <0~7> <vlan id>]
5. [CLI] provide CLI command to enable or disable the DHCP server assign LAN IP by mac
hash method for first link PC . If local side PC already be linked on CPE then need to
reboot CPE active this feature.
dhcpmachash <enable|disable>
dhcpmachash show
dhcpmachash help
6. [CLI] Use CLI command to disable the WLAN and WPS physical button
buttondisable <1|0>
buttondisable show
7. [DHCP] Add DHCP OPTION 66 and user can set DHCP OPTION 66 value in GUI
(Home Networking->TFTP Server Name)