Technical information

ManualsBrandsZyXEL Communications ManualsComputer equipmentG-102 - V1.0

Proprietary & Confidential Information

VMG8924-B10A

Standard Version

Firmware Release Note

V1.00(AAKL.7)K0

Date:

Dec, 12, 2014

Author:

Wood Huang

Reviewer:

Wood Huang

THIS DOCUMENT CONTAINS PROPRIETARY TECHNICAL INFORMATION THAT IS THE

PROPERTY OF THE ZyXEL AND SHOULD NOT BE DISCLOSED TO OTHERS IN WHOLE OR IN

PART, REPRODUCED, COPIED, OR USED AS BASIS FOR DESIGN, MANUFACTURING OR SALE

OF APPARATUS WITHOUT WRITTEN PERMISSION OF ZyXEL.

Summary of content (27 pages)

PAGE 1
VMG8924-B10A Standard Version Firmware Release Note V1.00(AAKL.7)K0 Date: Dec, 12, 2014 Author: Wood Huang Reviewer: Wood Huang THIS DOCUMENT CONTAINS PROPRIETARY TECHNICAL INFORMATION THAT IS THE PROPERTY OF THE ZyXEL AND SHOULD NOT BE DISCLOSED TO OTHERS IN WHOLE OR IN PART, REPRODUCED, COPIED, OR USED AS BASIS FOR DESIGN, MANUFACTURING OR SALE OF APPARATUS WITHOUT WRITTEN PERMISSION OF ZyXEL. © ZyXEL Communication Corp.
PAGE 2
TABLE OF CONTENTS REVISION HISTORY ......................................................................................................................................... 4 SUPPORTED PLATFORMS: ............................................................................................................................. 5 VERSIONS: .......................................................................................................................................................... 5 NOTES: ..............
PAGE 3
MODIFICATIONS IN V1.00(AAKL.0)B2 ....................................................................................................... 24 MODIFICATIONS IN V1.00(AAKL.0)B1 ....................................................................................................... 25 DEFAULT SETTINGS IN V1.00(AAKL.7)K0................................................................................................. 26 PUBLIC DOMAIN SOFTWARE ANNOUNCEMENTS ...........................................................
PAGE 4
Revision History Date Release Author 2013/04/29 1.0 Wood Huang FW release for V1.00(AAKL.0)b1 2013/05/10 1.0 Wood Huang FW release for V1.00(AAKL.0)b2 2013/05/29 1.0 Wood Huang FW release for V1.00(AAKL.0)C0 2013/07/30 2.0 Wood Huang FW release for V1.00(AAKL.1)b1 2013/08/20 2.1 Wood Huang FW release for V1.00(AAKL.1)b2 2013/10/16 3.0 Wood Huang FW release for V1.00(AAKL.2)b1 2013/11/27 4.0 Wood Huang FW release for V1.00(AAKL.3)b1 2014/01/02 5.0 Cj Lai FW release for V1.
PAGE 5
ZyXEL VMG8924-B10A V1.00(AAKL.7)K0 Release Note Date: Dec. 12, 2014 Supported Platforms: ZyXEL VMG8924-B10A & VMG8324-B10A Versions: Bootbase version: V1.65 | 06/24/2014 16:23:59 Firmware version: V1.00(AAKL.7) Kernel version: 2.6.30 DSL mode code version: A2pv6F039i DSL driver version: d24e WLAN code version: 6.30.163.23.cpe4.12L06B.1 Voice code version: 4.12L.06 May 11 2012 11:58:17 IPTK 8.2.2 3G dongle WWAN package version: V1.07 APP agent version : 1.0.1 © ZyXEL Communication Corp.
PAGE 6
Notes: 1. 2. 3. QoS Monitor will show only if QoS software Queue is used. Qos software queue is created if rate limit or WFQ is configured. 802.11ac is supported with 4360 WLAN adaptor (VMG8924-B10A model). WPS lock down: 10 failures in 300 seconds. © ZyXEL Communication Corp.
PAGE 7
Modifications in V1.00(AAKL.7)K0 1. Base on V1.00(AAKL.7)C0 to release V1.00(AAKL.7)K0 Modifications in V1.00(AAKL.6)K0 1. Base on V1.00(AAKL.5)K1 to release V1.00(AAKL.6)K0 2. [ROM FILE][ITS# 141001109] Default setting Time Zone: Should be set to (GMT+02:00) Pretoria(South Africa). 3. [ROM FILE][ITS# 141000511] VDSL password is incorrect. Modifications in V1.00(AAKL.5)K1 1. Base on V1.00(AAKL.5)K0 to release V1.00(AAKL.5)K1 2. Change ROM file for customer’s request. Modifications in V1.00(AAKL.5)K0 1.
PAGE 8
DHCP Relay need to disable nat of all WAN configuration but try to disable nat in all of WAN still can’t enable DHCP Relay. 4. [Backup Configuration][ITS#140500036] Backup Restore issue. The Log Settings page in the GUI, then change setting and clicked on Apply, backed up the configuration, factory reset the VMG. Restored the backed up configuration - Saw that the log settings were back to default. 5. [Wireless][SPRID# 140527483,140626498] The WPS can’t work. A.
PAGE 9
2. 3. 4. 5. 6. to 192.168.2.1/24. Then create new interface group and found the LAN host address also be 192.168.2.1/24. [LAN][ITS 140401095] WAN side change IP subnet, CPE redirect to URL of LAN. Access web GUI from WAN, then change LAN host address and CPE will redirect url to LAN as 192.168.1.1. [GUI][ITS 140500032] Spelling and Grammar mistakes. [MobileApp] Wan interface disappear after auto hunt. Use app to do vc auto hunt ppp WAN, the user name & password will be changed.
PAGE 10
Step1: Reset to default romfile Step2: Configuration WAN setting for Ethernet. Step3: Change subnet to 192.168.10.1 from 192.168.1.1 Step4: plug out/in WAN cable Step5: At this time, Monitor PC will receive the trace 192.168.10.1...etc(see attached trace) Step1: Reset to default romfile Step2: Configuration WAN setting for Ethernet. Step3: Change subnet to 192.168.10.1 from 192.168.1.1 Step4: Release/renew WAN ip address in WEB GUI. Step5: At this time, Monitor PC will receive the trace 192.
PAGE 11
8. [GUI] Display the static route rules on the Routing page which is learning from DHCP option 121. 9. [DSL] Support DSL Modulation, Bitswap and SRA via GUI 10. [WAN] Support a concurrent WAN automatic create by Broadband WAN interface Add & Edit. 11. [USER ACCOUNT] Modify User Configuration page. A. GUI can show account list. B. Supervisor level can show/add/modify/delete administrator/user level accounts. Administrator level can show/add/modify/delete administrator/user level accounts.
PAGE 12
18. [RIP] zebra support list command. e.g. redistribute kernel route-map test access-list 1 deny 0.0.0.0 access-list 1 permit any route-map test permit 1 match ip address 1 match interface br0 19. [FEATURE MODIFIED] 1. [Parent control] Parent control access schedule Time (Stard-End) rules table max list number is 3. 2. [GUI] DNS Entry Name can use ".". 3. OUI should be capital letters. 4. [GUI] Support Special characters `~!@#$%^&*() for WpaPsk 5.
PAGE 13
7. [SPRID 140414580] We couldn't ping the DUT from lan when Deny Ping Response is enabled. 8. [GUI] Fix access GUI with https is too long in the Chrome browser. 9. DHCP crash at LAN side. 10. [ITS# 140400873, 140105278][VOIP] Fix IOP problem with Asterisk SIP server. 11. [Wireless] For WIFI country code EU/60 in driver version 6.30.163.23.cpe4.12L06B.1 there are channels 149+ in 5G band 12. [PPPoE] Send a PADT packet with old session id before establish a new PPP connetion. To Fix 1.
PAGE 14
2. Will disable(grey) WAN enable option while “Trust domain” is enabled. 2. Fix policy Route. [ITS: #140301470] DHCP conditional service. 3. Enhance the changing LAN IP behavior of VMG8924, DO NOT reboot device after changing LAN host IP. [BUG FIX] 17. [ITS: #140200568] [QOS] Bandwidth configuration issue. Symptom: 1. Cannot add a LAN queue. 2. Add a LAN queue and set up the class, the Qos downstream doesn't work. 18.
PAGE 15
38. [ITS: #130804887] Deny Ping Response step: 1. make sure CPE get WAN IP (I used EtherWAN) 2. ping to CPE’s WAN IP, CPE no response 3. access to Firewall> DoS, enable “Deny Ping Response” then disable it 4. ping to CPE’s WAN IP, CPE responsed 39. [ITS: #140105286] In PTM mode, when traffic mirror is enabled, device will hang on and reboot. 40. [ITS: #140204248] IOP issue with old Mac OSX 10.6.8. 41. [ITS: #131201237, #140201118] Interface collisions & error count is too high. 42.
PAGE 16
Modifications in V1.00(AAKL.4)b3 [BUG FIX] 1. [TR-069] FW upgrade fail via TR-069. Modifications in V1.00(AAKL.4)b2 [FEATURE ENHANCED] 4. Upgrade the modem code to A2pv6F039i. [FEATURE MODIFIED] 1. Change WiFi country code setting to EU/60. And make sure all DFS solution has been implemented.(Check WiFi country code by CLI command : wlctl country ) 2. [ITS: #140105131] : Fixed , After configure PPP connection then CPE no response to ACS issue and response statuse change to 1. 3.
PAGE 17
factory default and reboot. 2. Remove the strong passwords. Change the admin password unnecessary alpha character + number character. [BUG FIX] 1. [ITS: #140105131] : Fixed , After configure PPP connection then CPE no response to ACS issue 2. [ITS: #140201830,#140200332] : Fixed , upload config (clear text passwd) from TR069 or Web Gui or FTP then the admin passwd or ppp passwd or TR069 passwd will be error issue. 3. [ITS:#140202892] : Change the admin passwd to quick1234 will be error. 4.
PAGE 18
Change design to disable the erase rom-d function in CFE via HW reset button. And also upgrade cfe version to V1.63. 2. Sideband description on 2.4G GUI.  [BUG FIX] 1. ITS: 140200569 , The root cause is disable the Ethernet WAN and then enable it. The speed will keep fix 100M. (1)When we fix 1000M on Ethernet wan and then disable it. Make sure Ethernet WAN link down. (2) Enable Ethernet WAN, it will fix on 100M. After reboot, Ethernet WAN can back to 1000M. 2.
PAGE 19
enable. (3)The interface will restore to default group. 2. Replace CPE All 'MitraStar' string to 'ZyXEL'. 3.  [BUG FIX] 1. ITS:131104543, 131100434 (1) IGMP flooding when igmp snooping mode is standard ,(2) IPTV can not work in igmp proxy but VLC player can do it. 2. ITS : 131100747 ,Symptom: WAN PC can ping to CPS's LAN interface with bridge WAN.(1)Setup CPE WAN to bridge mode.(2)Setup WAN PC's address in the same subnet(3)WAN PC ping CPE's LAN interface, then get ping response. 3.
PAGE 20
11.  Modifications in V1.00(AAKL.3)b1 1. 2. 3. Base on V1.00(AAKL.2)b1 to release V1.00(AAKL.3)b1 [FEATURE ENHANCEMENT] Add some CLI commands. ( pppoectl, firewall, wlanctl, route, lan, dmz and passwd) [FEATURE ENHANCEMENT] The CLI LAN config command need to support generate DHCP subnet IP automatically. 4. [FEATURE ENHANCEMENT] Block it from CLI with web GUI if DMZ IP same LAN IP. 5. [BUG FIX] [ITS 131101298] If MGMT and DMZ work in same time then MGMT will fail. 6.
PAGE 21
19. [BUG FIX][TR069] Fix wrong comparison statement 20. [BUG FIX][TR069] F ix incorrect fprintf argument 21. [BUG FIX][TR069] Cannot set Multi_WAN. 22. [BUG FIX][TR069] After download file, some parameter values are always zero. These parameters are: InternetGatewayDevice.DownloadDiagnostics.TestBytesRecived InternetGatewayDevice.DownloadDiagnostics.TotalBytesRecived InternetGatewayDevice.DownloadDiagnostics.X_5067F0_Result.1.TestBytesRecived InternetGatewayDevice.DownloadDiagnostics.
PAGE 22
sys-serial-no : "S130Y11021794 8324 100AAKL0b2” VMG 8924-B10A sys-serial-no : "S130Y11021794 8924 100AAKL0b2” 38. [Bug Fix] When setup DNS6 from ISP, GUI can’t display DNS value. Condition: A. Go to Home Network Setting/Home Networking/LAN Setup page. B. Enable IPv6 and select IPv6 DNS Value server to "From ISP". C. Connect with WAN and re-flash LAN. D. DNS IP address still empty. 39. [Feature Change] Dual stack enable as default on all WAN connection. 40.
PAGE 23
Modifications in V1.00(AAKL.1)b1 53. Base on V1.00(AAKL.0)C0 to release V1.00(AAKL.1)b1 54. [Bug Fix][SPRID 121217134] Add a new interface group that select LAN interface and none WAN interface can create successfully. 55. [Bug Fix][SPRID 121217135] There are redundant wireless LAN interfaces on interface group page. 56. [Bug Fix][SPRID121218221] WLAN LED will not off, when WLAN configure disable From GUI and HW button. 57. [Bug Fix][SPRID 130225373] In the Wake on LAN page, the IP address column is 58. 59.
PAGE 24
73. 74. 75. 76. 77. 78. 79. 80. 81. 82. 83. 84. 0x00000001) = 1 [Bug Fix][ITS 130504207] V6 auto renew dhcp6c won't renew when receive more than one reply message. [Bug Fix][ITS 130401093] Dhcp6c will re-init if reveive more than one reply message. [Bug Fix] LAN PC can't ping to WAN (IPv6) when firewall is disabled. [FEATURE MODIFICATION][ITS 130502491] In Maintenance->Time page, Daylight Saving setting, Order field. Change Fifth to Last.
PAGE 25
92. 93. 94. 95. 96. power management. [BUG FIX] [SPRID 130415492] [Remote MGMT] Type "sys atsh " via ssh response error. [BUG FIX] [SPRID 130412361] [3G]LAN PC still can't access Internet after 3G connect up when DUT has 2 WAN connections. [BUG FIX] [SPRID 130416649] [GUI] The information about 2.4G and 5G are not correct in the Connection Status page(Interface Status) . [BUG FIX] [SPRID 130415453] When system Log of Category select "DHCP Server", GUI (Log) can't show any about DHCP Server information.
PAGE 26
Default Settings in V1.00(AAKL.7)K0 Please refer to V100AAKL7K0.rom for more detail. It can be viewed by text editor. Recommend to use XML parser to get well organization result. 1. Username and password: (1) admin/1234 (2) zyuser/1234 2. GUI configuration: http://192.168.1.1/ 3. How to enter sh mode: enter sh in main menu. 4. Enable Deny Ping by default. 5. Change ACS URL to https://axess.tr069.co.za:7549/rps/CPEManager/CPEs/Auth_Basic/genericTR69. © ZyXEL Communication Corp.
PAGE 27
Public Domain Software Announcements The following public domain software are used in this firmware release: - MIPS Linux kernel, version 2.6.30 http://www.linux-mips.org or http://kernel.org - Bridge-Utils http://bridge.sourceforge.net - BusyBox 1.0.0 toolset http://www.busybox.net/ - Dproxy: dproxy-nexgen - http://dproxy.sourceforge.net ebtables 2.0.6 http://ebtables.sourceforge.net bftpd 1.0.24 http://www.bftpd.org/ iproute2 iproute2-2.4.7-now-ss020116-try.tar.gz http://www.linuxgrill.