User`s guide

Dimension ES-3024 Ethernet Switch
9-2 Filtering
Figure 9-1 Filtering
The following table describes the related labels in this screen.
Table 9-1 Filtering
LABEL DESCRIPTION
Active Make sure to select this check box to activate your rule. You may temporarily
deactivate a rule without deleting it by deselecting this check box.
Name Type a descriptive name for this filter rule. This is for identification purpose only.
Protocol Select the protocol type to which this rule applies.
Source The next fields pertain to the source MAC address and source port.
Ignore Click this check box to ignore any traffic from all source ports.
MAC Address Type a MAC address in valid MAC address format, that is, six hexadecimal character
pairs or click Any MAC /VID to apply the filter rule to all MAC addresses and VLAN
groups.