User`s guide

Dimension ES-3024 Ethernet Switch
Hardware Connections 3-3
Step 2. Loosen the thumbscrews from the cover plate and remove the cover plate from the optional slot. Do not
discard the cover plate. You can put the cover plate back on if you remove the new module.
Figure 3-2 Loosening the Screws and Removing the Cover Plate
Step 3. You should wear an anti-static wrist strap or touch any grounded or metal objects to discharge any bodily
static electricity before you continue.
Step 4. Remove the optional module from its protective anti-static packaging. Avoid touching the onboard
circuit components by holding it by the edge.
Step 5. Insert the optional module into an available expansion slot on the switch. Press it firmly until the
optional module snaps into place.
Step 6. Secure it to the switch with the retaining screws.
Figure 3-3 Inserting An Example Module
1
Never force, bend or twist the optional modules into the expansion slots.
1
This is an example module only!
Slide the optional module
into the expansion slot until
it snaps into place.