User`s guide

Dimension ES-3024 Ethernet Switch
26-6 Command Examples
Figure 26-10 sys cluster status Command Example
26.4 ip Commands
These are the commonly used commands that belong to the ip group of commands. Use “config save” to save
these configurations.
26.4.1 ip ping
Syntax:
ip ping <hostid>
This command pings a remote host. An example is shown next.
Figure 26-11 IP PING Command Example
26.4.2 ip route status
Syntax:
ip route status
This command displays the routing table. An example is shown next.
Figure 26-12 ip route status Command Example
26.4.3 ip arp status
ES-3024> ip ping 192.168.1.10
Resolving 192.168.1.10... 192.168.1.10
sent rcvd rate rtt avg mdev max min
1 1 100 0 0 0 0 0
2 2 100 0 0 0 0 0
3 3 100 0 0 0 0 0
ES-3024> ip route status
Dest FF Len Device Gateway Metric stat Timer Use
192.168.1.0 00 24 swp00 192.168.1.1 1 041b 0 3
default 00 0 swp00 192.168.1.254 2 001b 0 4205
test_mem> sys cluster showCandidate
NO.1
hwAddr = 00:a0:c5:e8:e5:e3
hostName=
modelName=VES-1000
channel =
NO.2
hwAddr = 00:a0:c5:77:77:77
hostName=
modelName=VES-1000
channel =
test_mem>