User`s guide

Dimension ES-3024 Ethernet Switch
26-2 Command Examples
If you clear a log (using the sys log clear command), you cannot view it again.
26.2.3 sys version
Syntax:
sys version
This command shows the RAS code, firmware version, system uptime and bootbase version.
An example is shown next.
Figure 26-2 sys version Command Example
26.2.4 sys monitor status
Syntax:
sys monitor status
This command shows the hardware monitor’s status.
An example is shown next.
Figure 26-3 sys monitor status Command Example
26.2.5 sys sw vlan1q vlan list
Syntax:
sys sw vlan1q vlan list <all|VID|start_VID|end_VID>
where
<all|VID|start
_VID|end_VID>=
Specify either all of the VLAN entries (
all), a single VLAN ID (VID) or a
range of VLAN IDs starting from a certain VID (
start_VID) or a range of
VLAN Ids ending at a specific VID (
end_VID).
This command displays the IEEE 802.1Q tagged VLAN table. An example is shown next.
ES-3024> sys version
ZyNOS version: V3.50(DU.0)b8 | 08/18/2003
romRasSize: 1513458
system up time: 0:03:37 (550d ticks)
bootbase version: V1.0 | 04/25/2003
ES-3024> sys monitor status
Time V0 V1 V2 V3 V4 T0 T1 T2 F00 F01 F02 F10 Error
---------- ------ ------ ------ ------ ------ ----- ----- ----- ----- ----- ----- ----- --------
345 2.512 1.840 3.296 12.160 4.992 33.0 32.0 32.0 5882 6010 5967 5841 00000000