User`s guide

Dimension ES-3024 Ethernet Switch
25-16 Introduction to CLI
Table 25-4 Command Summary: ip
COMMAND DESCRIPTION
kick <tcb>
Drops the TCP connection of the
specified TCP Control Block.
limit [value]
Sets a TCP output window limit.
mss [value]
Inputs the TCP Maximum
Segment Size.
reset <tcb>
Resets the TCP connection of the
specified TCP Control Block.
rtt <tcb> <value>
Sets the round trip time for the
TCP control block.
status [tcb] [<interval>]
Displays the TCP statistic
counters.
syndata [on|off]
Turns on/off the option to send
data with the SYN packet.
trace [on|off]
Turns on/off the trace for
debugging.
telnet <host> [port]
Telnets to the specified host.
traceroute <host> [ttl] [wait] [queries]
Sends ICMP packets to trace the
route of a remote host.
igmpsnoop
status
Displays the IGMP group table.
querier
Displays the port number of the
incoming port that received the
latest IGMP querier.
enable
Turns on IGMP snooping.
disable
Turns off IGMP snooping.
ip dhcp <iface> mode <none | client>
Set an interface to accept
information from a DHCP server.
dhcp <iface> status
Show whether an interface can
accept information from a DHCP
server.
dhcp <iface> client release
Release DHCP information such
as the IP address from an
interface
dhcp <iface> client renew
Renew the IP address on the
interface.
25.2.5 config Command
Table 25-5 Command Summary: config