User`s guide

Dimension ES-3024 Ethernet Switch
Introduction to CLI 25-11
Table 25-2 Command Summary: sys sw
COMMAND DESCRIPTION
auth <profile | radius>
Sets whether an external
RADIUS server or the internal
switch user database performs
authentication.
portcontrol<port-no><auto |auth |
unauth>
Sets how the specified port
should be authenticated.
radius
server <ip>
Sets the external RADIUS server
IP address.
secret <secret>
Sets the external RADIUS server
password.
port <port>
Sets the external RADIUS server
port number.
show
Displays the external RADIUS
server settings.
profile
Internal switch user database.
Information in this database is
flushed on restarting the switch.
add <username> <passwd>
Creates a username and
password profile in the internal
switch user database.
delete <idx>
Deletes a username and
password profile in the internal
switch user database.
list
Lists all profiles in the internal
switch user database.
class
A class is the basic rule
parameters for a bandwidth
control, port mirror or port filter
rule.
display
Displays run-time bandwidth
control, port mirror and port filter
rule status.
l2find <src port> <src MAC> <src vid>
<dest port> <dest MAC> <dest vid>
Find source/destination port,
MAC address and VLAN group
information.
l2set <src port>
<
src mac> <src vid><dest
port><dest mac> <dest
vid><protocol>
Sets source/destination port,
MAC address, VLAN group and
protocol information.
del <Class Idx>
A class is automatically created
when you create a bandwidth
control, port mirror or port filter
rule. This command deletes the
specified class.