User`s guide

Dimension ES-3024 Ethernet Switch
Cluster Management 22-5
Figure 22-5 Configuring Cluster Management
Table 22-4 Configuring Cluster Management
LABEL DESCRIPTION
Active Select Active to have this switch become the cluster manager switch. A cluster can
only have one manager. Other (directly connected) switches that are set to be
cluster managers will not be visible in the Clustering Candidates list. If a switch
that was previously a cluster member is later set to become a cluster manager,
then its Status is displayed as Error in the Cluster Management Status screen
and a warning icon (
) appears in the member summary list below.
Name Type a name to identify the Clustering Manager. You may use up to 32 printable
characters (no spaces are allowed).