User`s guide

Dimension ES-3024 Ethernet Switch
Routing Protocol 19-1
This chapter shows you how to configure the routing functions.
19.1 Static Route
Static routes tell the ES-3024 how to forward IP traffic when you configure the TCP/IP parameters manually.
Click Routing Protocol in the navigation panel and then Static Routing to display the screen as shown.
Figure 19-1
Static Routing
The following table describes the related labels you use to create a static route.
Table 19-1 Static Routing
LABEL DESCRIPTION
Active This field allows you to activate/deactivate this static route.
Name Enter a descriptive name for this route. This is for identification purpose only.
Chapter 19
Routing
Protocol