User`s guide

Dimension ES-3024 Ethernet Switch
Bandwidth Control 11-3
Table 11-1 Bandwidth Control
LABEL DESCRIPTION
MAC Address Select Any MAC/VID to apply the rule to all MAC address and VLAN group identification
numbers.
To specify a source, select the second choice and type a MAC address in valid MAC address
format (six hexadecimal character pairs) and then enter the VLAN group identification number.
VID Type the VLAN group identification number.
The VID for the source and destination must be the same.
Port Select the port to which the rule should be applied. You may choose one port only or all ports
(All Ports).
Destination The next fields pertain to the destination MAC address and destination port.
Ignore Click this check box to ignore any traffic to all destination ports.
MAC Address Select Any MAC/VID to apply the rule to all MAC address and VLAN group identification
numbers.
To specify a destination, select the second choice and type a MAC address in valid MAC
address format (six hexadecimal character pairs) and then enter the VLAN group identification
number.
VID Type the VLAN group identification number.
The VID for the source and destination must be the same.
Port Select the port to which the rule should be applied. You may choose one port only or all ports
(All Ports).
Add Click Add to save the new rule to the switch. It then displays in the summary table at the bottom
of the screen.
Cancel Click Cancel to reset the fields to your previous configuration.
Clear Click Clear to clear the fields to the factory defaults.
11.2 Viewing and Editing a Bandwidth Control Rule
To view a summary of the rule configuration, scroll down to the summary table at the bottom of the Bandwidth
Control screen.
To change the settings of a rule, click a number in the Index field.
Figure 11-2 Bandwidth Control: Summary Table