User`s guide

Chapter 11 DHCP Server

EMG2926-Q10A User’s Guide

11.3 DHCP Server Advanced Screen

This screen allows you to assign IP addresses on the LAN to specific individual computers based on

their MAC addresses. You can also use this screen to configure the DNS server information that the

EMG2926-Q10A sends to the DHCP clients.

To change your EMG2926-Q10A’s static DHCP settings, click Network > DHCP Server >

Advanced. The following screen displays:

Figure 65 Network > DHCP Server > Advanced

The following table describes the labels on this screen.

Lease Time Specify how long each computer can use the IP address before it has to request the

information again.

Apply Click Apply to save your changes with the EMG2926-Q10A.

Cancel Click Cancel to begin configuring this screen afresh.

Table 43 Network > DHCP Server > General (continued)

LABEL DESCRIPTION

Table 44 Network > DHCP Server > Advanced

LABEL DESCRIPTION

Static DHCP Table

# This is the index number of the static IP table entry (row).