User`s guide

Chapter 10 LAN
EMG2926-Q10A User’s Guide
93
The following table describes the labels on this screen.
10.3 IP Alias Screen
Use this screen to have the EMG2926-Q10A use IP aliasing to create LAN subnets. Click LAN > IP
Alias.
Figure 62 Network > LAN > IP Alias
The following table describes the labels on this screen.
Table 40 Network > LAN > IP
LABEL DESCRIPTION
IP Address Type the IP address of your EMG2926-Q10A in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your
EMG2926-Q10A will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the EMG2926-Q10A.
Apply Click Apply to save your changes with the EMG2926-Q10A.
Cancel Click Cancel to begin configuring this screen afresh.
Table 41 Network > LAN > IP Alias
LABEL DESCRIPTION
IP Alias 1, 2 Check this to enable IP aliasing to configure another LAN network for the EMG2926-
Q10A.
IP Address Type the IP alias address of your EMG2926-Q10A in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your
EMG2926-Q10A will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the EMG2926-Q10A.
Apply Click Apply to save your changes with the EMG2926-Q10A.
Cancel Click Cancel to begin configuring this screen afresh.