User`s guide

Chapter 9 Wireless LAN

EMG2926-Q10A User’s Guide

Figure 54 Network > Wireless LAN 2.4G/5G > MAC Filter

The following table describes the labels on this screen.

Table 34 Network > Wireless LAN 2.4G/5G > MAC Filter

LABEL DESCRIPTION

SSID Select Select the SSID for which you want to configure MAC filtering.

MAC Address

Filter

Select to turn on (Enable) or off (Disable) MAC address filtering.

Filter Action Define the filter action for the list of MAC addresses in the MAC Filter Summary table.

Select Allow to permit access to the EMG2926-Q10A, MAC addresses not listed will be

denied access to the EMG2926-Q10A.

Select Deny to block access to the EMG2926-Q10A, MAC addresses not listed will be allowed

to access the EMG2926-Q10A.

MAC Filter Summary

Set This is the index number of the MAC address.

MAC Address Enter the MAC address of the wireless station that is allowed or denied access to the

EMG2926-Q10A.

Apply Click Apply to save your changes back to the EMG2926-Q10A.

Cancel Click Cancel to reload the previous configuration for this screen.