User`s guide

Chapter 9 Wireless LAN

EMG2926-Q10A User’s Guide

Figure 51 Network > Wireless LAN 2.4G/5G > More AP

The following table describes the labels on this screen.

9.4.1 More AP Edit

Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP screen.

The following screen displays.

Figure 52 Network > Wireless LAN 2.4G/5G > More AP: Edit

Table 32 Network > Wireless LAN 2.4G/5G > More AP

LABEL DESCRIPTION

# This is the index number of each SSID profile.

Status This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).

SSID An SSID profile is the set of parameters relating to one of the EMG2926-Q10A’s BSSs. The

SSID (Service Set IDentifier) identifies the Service Set with which a wireless device is

associated.

This field displays the name of the wireless profile on the network. When a wireless client

scans for an AP to associate with, this is the name that is broadcast and seen in the

wireless client utility.

Security This field indicates the security mode of the SSID profile.

Edit Click the Edit icon to configure the SSID profile.