User`s guide

Chapter 9 Wireless LAN
EMG2926-Q10A User’s Guide
77
See the rest of this chapter for information on the other labels in this screen.
9.3 Wireless Security
The screen varies depending on what you select in the Security Mode field.
9.3.1 No Security
Select No Security to allow wireless clients to communicate with the access points without any
data encryption.
Note: If you do not enable any wireless security on your EMG2926-Q10A, your network is
accessible to any wireless networking device that is within range.
Figure 47 Network > Wireless LAN 2.4G/5G > General: No Security
The following table describes the labels on this screen.
Apply Click Apply to save your changes with the EMG2926-Q10A.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 27 Network > Wireless LAN 2.4G/5G > General (continued)
LABEL DESCRIPTION
Table 28 Network > Wireless LAN 2.4G/5G > General: No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.
Apply Click Apply to save your changes with the EMG2926-Q10A.
Cancel Click Cancel to reload the previous configuration for this screen.