User`s guide

Chapter 7 Monitor

EMG2926-Q10A User’s Guide

7.2.2 Log Setting

You can configure which logs to display on the View Log screen. Go to the Log Setting screen and

select the logs you wish to display. Click Apply to save your settings. Click Cancel to start the

screen afresh.

Figure 37 Log Settings

7.3 DHCP Table

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to

obtain TCP/IP configuration at start-up from a server. You can configure the EMG2926-Q10A’s LAN

as a DHCP server or disable it. When configured as a server, the EMG2926-Q10A provides the TCP/

IP configuration for the clients. If DHCP service is disabled, you must have another DHCP server on

that network, or else the computer must be manually configured.

Click Monitor > DHCP Table or Configuration > Network > DHCP Server > Client List. Read-

only information here relates to your DHCP status. The DHCP table shows current DHCP client

information (including MAC Address, and IP Address) of all network clients using the EMG2926-

Q10A’s DHCP server.

Figure 38 Monitor > DHCP Table