User`s guide

Chapter 5 Router Mode
EMG2926-Q10A User’s Guide
47
Streamboost
Management
Network Use this screen to view transmission data rates between the EMG2926-
Q10A and the Internet or connected devices.
Bandwidth Use this screen to configure the maximum allowable bandwidth and enable
automatic updates.
Priorities Use this screen to change the priority of the connected devices.
Up Time Use this screen to view the top five traffic flows transmitting to/from the
selected LAN device(s).
Downloads Use this screen to view the type and percentage of most download traffic.
All Events Use this screen to view the time at which a traffic flow is given bandwidth
for optimal, good or best-effort performance.
Remote
Management
WWW Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the EMG2926-Q10A.
SNMP Use this screen to change your EMG2926-Q10A’s SNMP settings.
Wake On LAN Use this screen to enable Wake on LAN to remotely turn on a device on the
local network.
UPnP General Use this screen to enable UPnP on the EMG2926-Q10A.
USB Media
Sharing
DLNA Use this screen to have the EMG2926-Q10A function as a DLNA-compliant
media server, that lets DLNA-compliant media clients play video, audio, and
photo content files stored on the connected USB storage device.
SAMBA Use this screen to enable file sharing through the EMG2926-Q10A.
FTP Use this screen to have the EMG2926-Q10A act as a FTP server.
Port
Configuration
Use this screen to change the Ethernet port speed and duplex settings.
MAINTENANCE
General General Use this screen to view and change administrative settings such as system
and domain names.
Account Account
Setup
Use this screen to change the password of your EMG2926-Q10A.
Time Time Setting Use this screen to change your EMG2926-Q10A’s time and date.
Backup/
Restore
Backup/
Restore
Use this screen to backup and restore the configuration or reset the factory
defaults to your EMG2926-Q10A.
Restart System
Restart
This screen allows you to reboot the EMG2926-Q10A without turning the
power off.
Language Language This screen allows you to select the language you prefer.
Sys OP Mode Sys OP Mode This screen allows you to select whether your device acts as a router, or an
access point.
Table 20 Navigation Panel: Router Mode (continued)
LINK TAB FUNCTION