User`s guide

Chapter 5 Router Mode
EMG2926-Q10A User’s Guide
44
5.2.1 Navigation Panel
Use the sub-menus on the navigation panel to configure EMG2926-Q10A features.
MAC Address This shows the 5GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the EMG2926-Q10A in the 5GHz wireless
LAN.
Channel This shows the channel number which you select manually.
Security This shows the level of wireless security the EMG2926-Q10A is using.
Firewall This shows whether the firewall is enabled or not.
Summary
Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen (Section 7.4 on page 63).
Use this screen to view port status and packet specific statistics.
WLAN 2.4G Station
Status
Click Details... to go to the Monitor > WLAN 2.4G Station Status screen (Section 7.5 on
page 64). Use this screen to view the wireless stations that are currently associated to the
EMG2926-Q10A’s 2.4GHz wireless LAN.
WLAN 5G Station Status Click Details... to go to the Monitor > WLAN 5G Station Status screen (Section 7.5 on
page 64). Use this screen to view the wireless stations that are currently associated to the
EMG2926-Q10A’s 5GHz wireless LAN.
System Status
Item This column shows the type of data the EMG2926-Q10A is recording.
Data This column shows the actual data recorded by the EMG2926-Q10A.
System Up Time This is the total time the EMG2926-Q10A has been on.
Current Date/Time This field displays your EMG2926-Q10A’s present date and time.
System Resource
- CPU Usage This displays what percentage of the EMG2926-Q10A’s processing ability is currently being
used. When this percentage is close to 100%, the EMG2926-Q10A is running at full load,
and the throughput is not going to improve anymore. If you want some applications to have
more throughput, you should turn off other applications (for example, using bandwidth
management.)
- Memory Usage This shows what percentage of the heap memory the EMG2926-Q10A is using.
Interface Status
Interface This displays the EMG2926-Q10A port types. The port types are: WAN, LAN and WLAN.
Status For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or
Down when the 2.4G/5G WLAN is disabled.
Rate For the LAN ports, this displays the port speed and duplex setting or N/A when the line is
disconnected.
For the WAN port, it displays the port speed and duplex setting if you’re using Ethernet
encapsulation. This field displays N/A when the line is disconnected.
For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/
5GHz WLAN is enabled and N/A when the WLAN is disabled.
Table 19 Status Screen: Router Mode (continued)
LABEL DESCRIPTION