User`s guide

EMG2926-Q10A User’s Guide
41
CHAPTER 5
Router Mode
5.1 Overview
The EMG2926-Q10A is set to router mode by default. Routers are used to connect the local network
to another network (for example, the Internet). In the figure below, the EMG2926-Q10A connects
the local network (LAN1 ~ LAN4) to the Internet.
Figure 31 EMG2926-Q10A Network
Note: The Status screen is shown after changing to the Expert Mode of the Web
Configurator. It varies depending on the device mode of your EMG2926-Q10A.
5.2 Router Mode Status Screen
When you are in Easy Mode, click the Expert Mode icon ( ) in the upper right corner of
the screen to go to Expert Mode. Click in Expert Mode to open the status screen.
Modem