User`s guide

Chapter 4 Easy Mode
EMG2926-Q10A User’s Guide
34
The following table describes the labels on this screen.
4.4.2 Parental Controls
Use this screen to view the parental control rules configured on the EMG2926-Q10A. Click the
Parental Control icon in the control panel of the Easy Mode to open the screen shown next. See
Chapter 17 on page 116 for how to enable and configure parental control rules.
Figure 24 Parental Control
Table 12 Power Saving
LABEL DESCRIPTION
Wireless Radio Choose whether you want to apply the power saving schedule to 2.4G Hz or 5G Hz
wireless radio.
WLAN Status Select On or Off to specify whether the Wireless LAN is turned on or off (depending on
what you selected in the WLAN Status field). This field works in conjunction with the
Day and For the following times fields.
Day Select Everyday or the specific days to turn the Wireless LAN on or off.
If you select Everyday you can not select any specific days. This field works in
conjunction with the For the following times field.
For the following
times (24-Hour
Format)
Select a start time using the first set of hour and minute (min) drop down boxes and
select an end time using the second set of hour and minute (min) drop down boxes. If
you chose On earlier for the WLAN Status the Wireless LAN will turn on between the two
times you enter in these fields. If you chose Off earlier for the WLAN Status the Wireless
LAN will turn off between the two times you enter in these fields.
In this time format, midnight is 00:00 and progresses up to 24:00. For example, 6:00
PM is 18:00.
Apply Click Apply to save your changes back to the EMG2926-Q10A.
Cancel Click Cancel to close this screen without saving any changes.