User`s guide

Chapter 3 Connection Wizard
EMG2926-Q10A User’s Guide
27
Figure 15 Wireless Security: No Security
The following table describes the labels on this screen.
3.5.2 Wireless Security: WPA2-PSK
Choose WPA2-PSK security in the Wireless Security screen to set up a password for your wireless
network.
Table 8 Wireless Security: No Security
LABEL DESCRIPTION
Wireless
Network Name
(SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
If you change this field on the EMG2926-Q10A, make sure all wireless stations use the same
SSID in order to access the network.
Security Mode Select a security level from the drop-down list box.
Choose No Security to have no wireless LAN security configured. If you do not enable any
wireless security on your EMG2926-Q10A, your network is accessible to any wireless
networking device that is within range.
Exit Click this to close the wizard screen without saving.
Back Click this to return to the previous screen.
Next Click this to continue.