User`s guide

Chapter 24 Maintenance
EMG2926-Q10A User’s Guide
149
The following table describes the labels in this screen.
24.4 Time Setting Screen
Use this screen to configure the EMG2926-Q10A’s time based on your local time zone. To change
your EMG2926-Q10A’s time and date, click Maintenance > Time. The screen appears as shown.
Figure 104 Maintenance > Time
Table 71 Maintenance > Account > Edit
LABEL DESCRIPTION
Username Enter a descriptive name for the user account. The user name can be up to 15
alphanumeric characters (0-9, A-Z, a-z, -, _ with no spaces). With advanced account
security enabled, the user names must be a minimum length of six characters and
include both letters and numbers.
Old Password Type the default password or the existing password you use to access the system in
this field.
New Password Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm Type the new password again in this field.
Group This is the account type of the user.
The web configurator screens and privileges vary depending on which account type you
use to log in. Administrator accounts can configure the EMG2926-Q10A and upgrade
firmware while User accounts cannot do firmware upgrading.
Apply Click Apply to save your changes with the EMG2926-Q10A.
Cancel Click Cancel to begin configuring this screen afresh.