User`s guide

EMG2926-Q10A User’s Guide
147
CHAPTER 24
Maintenance
24.1 Overview
This chapter provides information on the Maintenance screens.
24.2 General Screen
Use this screen to set the management session timeout period. Click Maintenance > General.
The following screen displays.
Figure 101 Maintenance > General
The following table describes the labels on this screen.
24.3 Account Screen
It is strongly recommended that you change the password of the user account.
Table 69 Maintenance > General
LABEL DESCRIPTION
System Name System Name is a unique name to identify the EMG2926-Q10A in an Ethernet network.
Domain Name Enter the domain name you want to give to the EMG2926-Q10A.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the session times
out. The default is 5 minutes. After it times out you have to log in with your password
again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Apply Click Apply to save your changes with the EMG2926-Q10A.
Cancel Click Cancel to begin configuring this screen afresh.