User`s guide

Chapter 20 Remote Management
EMG2926-Q10A User’s Guide
132
The following table describes the labels on this screen.
20.4 Wake On LAN Screen
Wake On LAN (WoL) allows you to remotely turn on a device on the network, such as a computer,
storage device or media server. To use this feature the remote hardware (for example the network
adapter on a computer) must support Wake On LAN using the “Magic Packet” method.
You need to know the MAC address of the remote device. It may be on a label on the device.
Table 62 Management > Remote Management > SNMP
LABEL DESCRIPTION
SNMP Settings
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the EMG2926-Q10A
using this service.
Secured IP Select All to allow all computers to access the EMG2926-Q10A.
Otherwise, check Selected and specify the IP address of the computer that can
access the EMG2926-Q10A.
SNMP Enable Select this to allow a manager station to manage and monitor the EMG2926-Q10A
through the network via SNMP.
Get Community Enter the password for the incoming Get and GetNext requests from the
management station. The default is public and allows all requests.
Set Community Enter the password for incoming Set requests from the management station. The
default is public and allows all requests.
System Location Specify the geographic location of the EMG2926-Q10A.
System Contact Enter the name of the person in charge of the EMG2926-Q10A.
Trap Settings
Trap Enable Select this to have the EMG2926-Q10A send an SNMP trap to the specified IP
address when it receives the event. Clear this to disable it.
Trap Manager IP Type the IP address of the SNMP manager to which your SNMP traps are sent.
Trap Community Type the password sent with each trap to the SNMP manager. The default is public
and allows all requests.
Apply Click Apply to save your customized settings.
Cancel Click Cancel to begin configuring this screen afresh.