User`s guide

EMG2926-Q10A User’s Guide
129
CHAPTER 20
Remote Management
20.1 Overview
This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your EMG2926-Q10A from a remote location through
the following interfaces:
•LAN and WAN
•LAN only
•WAN only
System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds). The
EMG2926-Q10A automatically logs you out if the management session remains idle for longer than
this timeout period. The management session does not time out when a statistics screen is polling.
You can change the timeout period in the Maintenance > General screen
20.2 WWW Screen
To change your EMG2926-Q10A’s remote management settings, click Management > Remote
MGMT > WWW.
Figure 90 Management > Remote Management > WWW