User`s guide

Chapter 17 Parental Controls
EMG2926-Q10A User’s Guide
119
17.2.2 Add/Edit a Service
Click Add new service in the Parental Control > Add new rules/Edit screen to add a new
entry or click the Edit icon next to an existing entry to edit it. Use this screen to configure a service
rule.
Figure 82 Security > Parental Control > Add new rules/Edit > Add new service/Edit
Home Network
User
Select the LAN user that you want to apply this rule to from the drop-down list box. If you
select Custom, enter the LAN user’s MAC address. If you select All, the rule applies to all
LAN users.
Internet Access Schedule
Day Select check boxes for the days that you want the EMG2926-Q10A to perform parental
control.
Time Drag the time bar to define the time that the LAN user is allowed access.
Network Service
Network
Service Setting
If you select Block, the EMG2926-Q10A prohibits the users from using the services listed
below.
If you select Allow, the EMG2926-Q10A blocks all services except ones listed below.
Add new
service
Click this to show a screen in which you can add a new service rule. You can configure the
Service Name, Protocol, and Port of the new rule.
# This shows the index number of the rule. Select the checkbox next to the rule to activate it.
Service Name This shows the name of the service.
Protocol:Port This shows the protocol and the port of the service.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Blocked Site/
URL Keyword
Click Add to show a screen to enter the website URL or URL keyword to which the
EMG2926-Q10A blocks access. Click Delete to remove it.
Apply Click Apply to save your settings back to the EMG2926-Q10A.
Back Click Back to return to the previous screen.
Table 57 Security > Parental Control: Add/Edit (continued)
LABEL DESCRIPTION