User`s guide

ZyAIR B-5000 User’s Guide
Configuration Parameters 8-5
Table 8-2 Basic Configuration User profile
LABEL DESCRIPTION
Privilege
Level:
Select the privilege level. This shows the level of administrator access in the User
Profile
• 1: User Mode – enables you to view system information and ping a computer from
the ZyAIR.
• 2: Root Mode – enables you to change to supervisor mode, see chapter
Supervisor Mode in Part VI of this User’s Guide.
• 3: Configure Mode – enables you to change the configuration in supervisor mode,
see chapter Supervisor Mode in Part VI of this User’s Guide.
• Unlimited: unlimited privileges – enables all modes.
Show Mode Set as Menu or Command Mode. This affects the number of menus shown to the user;
see Console and Telnet chapters in this User’s Guide.
Max Screen Line Enter the maximum no of characters allowable (greater than 13 but less than or equal
to 24).
Keyboard Type
Select the type of keyboard interface (VT100, ANSI, Linux or X Window).
Client Address
Index
Enter ‘0’ to allow access to the user address pool, enter ‘-1’ for unlimited access (any
user could telnet to this access point and ignore the IP address of the client PC).
FINISH
Click FINISH to save the changes back to your ZyAIR.
Back
Click Back to go to the previous screen..
CANCEL
Click CANCEL to begin configuring the screen afresh.