User`s guide

ZyAIR B-5000 User’s Guide
5-4 Bridge Quick Setup
Table 5-3 Remote Wireless Operation Mode
LABEL Description
Remote Wireless
Bridge
If you selected Remote Wireless Router/Bridge in Bridge Operation Mode, see
Figure 5-1, then you can select Remote Wireless Bridge. See Part IV of this
User’s Guide for configuration examples of bridging.
Remote Wireless
Router
If you selected Remote Wireless Router/Bridge in Bridge Operation Mode, see
Figure 5-1, then you can select Remote Wireless Router. See Part IV of this
User’s Guide for configuration examples of bridging.
PPP over Ethernet
(PPPoE)
Point-to-Point Protocol over Ethernet (PPPoE) also functions as a dial-up
connection. Therefore you’ll also need a username and password and possibly
the PPPoE service name.
This information can be obtained from your Internet service provider.
Dynamic IP Address
(DHCP Client)
Choose Dynamic IP Address (DHCP Client) if you would like to obtain an IP
address automatically each time you log on.
Static IP Address
(Fixed IP)
Static IP Address (Fixed IP). The ZyAIR must have a static IP address in this
case. You’ll also need a login name, associated password, the DSL terminator IP
address and possibly a connection ID.
This information can be obtained from your Internet service provider.
Back
Click Back to go to the tutorial screen.
NEXT
Click NEXT to continue.
5.2 Quick Setup – TCP/IP
Use this screen to set up the TCP/IP configuration. See section 4.2 for information on all related fields.