User`s guide

ZyAIR B-5000 User’s Guide
Bridge Quick Setup 5-3
PPP over Ethernet
(PPPoE)
Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection.
Therefore you’ll also need a username and password and possibly the PPPoE
service name.
Your ISP will give you all needed information.
Dynamic IP Address
(DHCP Client)
Choose Dynamic IP Address (DHCP Client) if you would like to obtain an IP
address automatically each time you log on.
Static IP Address
(Fixed IP)
Static IP Address (Fixed IP). The ZyAIR must have a static IP address in this
case. This information can be obtained from your Internet service provider.
Back
Click Back to go to the tutorial screen.
NEXT
Click NEXT to continue.
5.1.2 Remote Wireless Operation Mode
Use this screen for Remote Router/Bridge Operation Mode (see Figure 3-1 for more information).
Figure 5-3 Remote Wireless Operation