User`s guide

ZyAIR B-5000 User’s Guide
4-18 Access Point Quick Setup
Table 4-8 Quick Setup Wireless
LABEL DESCRIPTION
Default Key The WEP keys are used to encrypt data. Both the ZyAIR and the wireless stations must
use the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters
("0-9", "A-F").
You must configure all four keys, but only one key can be activated at any one time. The
default key is key 1.
KeyGen If you choose to enable WEP, then WEP keys for 64-bit or 128-bit will be generated
when you click this button.
Back
Click Back to go to the previous screen.
NEXT
Click NEXT to save the changes back to your ZyAIR.
4.5 Quick Setup – Configuration Review
Review the settings of the ZyAIR in this screen. See the rest of this chapter for label descriptions. Click Back
to go to the previous screen. Click SAVE to go to the Restart screen.