User`s guide

ZyAIR B-5000 User’s Guide
4-12 Access Point Quick Setup
LABEL DESCRIPTION
Back
Click Back to return to the previous screen.
NEXT
Click NEXT to continue.
4.3 Quick Setup – Static Route
Static routes tell routing information that a networking device cannot learn automatically through other
means. The need for static routing can arise in cases where RIP (Routing Information Protocol) is disabled on
the LAN or a remote network is beyond the one that is directly connected to a remote node.
Use the Quick Setup – Static Route screen to configure static routes. This screen only applies to the ZyAIR
set up as an access point.
Figure 4-6 Quick Setup Static Route
The following table describes the labels in this screen.
Table 4-7 Quick Setup Static Route
LABEL DESCRIPTION
Static Route Settings
Index This is the static route number.