User`s guide

ZyAIR B-5000 User’s Guide
Web Configurator Overview 2-1
Chapter 2
Web Configurator Overview
This chapter describes how to access the ZyAIR web configurator and provides an overview of its
screens.
2.1 Web Configurator Overview
The web configurator makes it easy to configure and manage the ZyAIR. The screens you see in the web
configurator may vary somewhat from the ones shown in this document due to differences between firmware
versions. The IP address of your computer will need to be set if you are configuring the ZyAIR for the first
time, see Setting Up Your Computer’s IP Address in the appendix of this User’s Guide.
2.2 Accessing the ZyAIR Web Configurator
Step 1. Make sure your ZyAIR hardware is properly connected (refer to the Quick Installation Guide).
Step 2. Prepare your computer to connect to the ZyAIR (refer to Setting Up Your Computer’s IP Address
in the appendix of this User’s Guide).
Figure 2-1 Web Browser Address Field
Step 3. Launch your web browser.
Step 4. Type "192.168.1.1:2000" as the URL.
Step 5. Type the User Name, ‘admin’ is the factory default and Password, “1234” is the factory default
and click OK.
A
ddress field.