User`s guide

ZyAIR B-5000 User’s Guide
Firewall 28-9
Figure 28-6 Firewall Config Access Control
The following table describes the labels in this screen.
Table 28-3 Firewall Config Access Control
LABEL DESCRIPTION
Access Control
Activation
Select the radio button to Enable or Disable firewall access control. If you select
Disable then the ZyAIR will not use firewall services, even if the On is selected in the
source and destination addresses and a protocol and action has been selected.
On Select the check box for each entry that requires access control. Access control will
be made available only if the Access Control Activation radio button is set to
Enable.
Source Source of data transmission, LAN or WAN.